This website uses cookies

Read our Privacy policy and Terms of use for more information.

Welcome to The Gigacasting Newsletter

New here? Subscribe for weekly updates

Haitian Metal, together with Seres, Waffer Technology and Baowu Magnesium, has trial produced a large semi solid magnesium tailgate inner panel on its 7,000 ton magnesium double-injection thixomolding machine. Haitian presents the panel as the first large structural part made by magnesium double injection molding.

The company says the machine's twin injection units shorten the path the metal has to travel, and that the injection control system produces a complete fill and a dense structure, with better dimensional accuracy and strength than conventional die casting. Haitian gives the trial part an average wall thickness of 2 mm and a weight of 7.2 kg, nearly 50% lighter than a conventional steel tailgate inner.

Photo: Haitian Zhisheng Metal

Photo: Haitian Zhisheng Metal

Haitian first presented the 7,000 ton machine at China Die Casting in Shanghai in July 2025, with production readiness planned for later that year, and a twin-injection system intended to raise the volume of magnesium that can be shot into the die. In October it published the first pictures of the press, and an illustration already showed a tailgate on one side and a door on the other, to be filled in synchronous or asynchronous injection.

In November 2025, Waffer opened a lightweight-materials research centre and a magnesium application centre together with Haitian and the Magnesium Alloy Engineering Research Center of Chongqing University, and installed five Haitian thixomolding islands, the 7,000 ton machine among them. The press has a clamping force of 70,000 kN, two 180 mm screws and a shot weight of more than 38 kg.

On 13 May 2026, Seres and Baowu Magnesium put a semi-solid magnesium instrument-panel cross-car beam into mass production on a Haitian 3,600-tonne machine, with a stated stable output of 1,000 units a day.

At the end of September, Waffer told investors that the 7,000-tonne machine had passed testing at its plant in Maanshan, Anhui. Haitian already listed the tailgate inner among the parts the press was meant to make, alongside the cross-car beam, the C-D pillar, door inners and a rear underbody.

Photo: Haitian Zhisheng Metal

Source: Haitian Zhisheng Metal, via Zhuzao Toutiao (11 November 2026); Die Casting Weekly (yzweekly) (13 November 2026).

The Gigacasting Database is priced at only €649/year (VAT included)
see plans & products or subscribe here